10Prestone Antifreeze Compatibility Reference Sheet for Trai

MIDWESTWHEEL.COM IOWA MISSOURI DES MOINES 1436 E. Ovid Ave. office 515.265.1491 fax 515.265.4120 parts fax 800.314.4329 parts 800.888.0248 CEDAR RAPIDS 200 50th Ave. S.W. main 319.365.4453 fax 319.365.6327 parts fax 877.706.6085 parts 800.332.5435 DAVENPORT 8502 Northwest Blvd. main 563.322.2671 fax 563.322.5940 parts 800.553.1886 SIOUX CITY 1819 E. 4th St. main 712.252.7969 fax 712.252.6149 parts 800.943.3534 CLEAR LAKE 840 Hwy. 18 W. main 641.357.7101 fax 641.357.8190 parts fax 800.548.9674 parts 800.397.5630 KANSAS CITY 5801 E. Front St. main 816.471.1552 fax 816.471.0813 parts 800.821.7402 TRUCK PARTS SUPER STORE TM Phosphate Organic Acid Technology (POAT) If a coolant filter is equipped DO NOT USE a SCA charged coolant filter with HD ELC AFC’s. Only use a non-charged filter when equipped. Light-duty/Medium-duty POAT Antifreeze/Coolants Color: Red, Yellow, Blue, Green, Pink other colors could be used. Check formulation before making decisions on mixing/top-off or converting to other Antifreeze/Coolants. Factory fill OEM’s presently Asian. Compatible Prestone ® Product(s): Mixing/top-off Prestone ® with COR-GUARD AF2000/AF2100 (preferred top-off AFC) and PRIME ® by Prestone ® AF3000/AF3100. Flush & Refill: Changing cooling system from POAT AFC to Prestone with COR-GUARD AF2000/AF2100 or Prime ® by Prestone ® AF3000/ AF3100. Chemical flush required if cooling system shows any signs of contamination. Otherwise no flush required to properly drain & refill with Prestone ® with COR-GUARD AF2000/AF2100 or Prime ® by Prestone ® AF3000/AF3100. Propylene Glycol Based Conventional (IAT) Antifreeze/Coolant ON/OFF Road Equipment, Light-duty/Medium-duty & Heavy-duty PG IAT Antifreeze/Coolants Color: Green, Blue, other colors could be used. Check formulation before making decisions on mixing/top-off or converting to other Antifreeze/Coolants. Presently some OFF Road equipment use PG AFC for factory fill (John Deere, Bobcat, and others). To date no LD or MD use PG as factory fill in the cooling system. Compatible Prestone ® Product(s): Mixing/top-off Prestone ® LowTox ® Antifreeze/Coolant. Flush & Refill: Changing coolant in a system recommended to use PG AFC a chemical flush is required if cooling system shows any signs of contamination. Otherwise no flush required to properly drain & refill with Prestone ® LowTox ® Antifreeze/Coolant. Prestone ® LowTox ® Antifreeze/Coolant is SCA pre-charged, which means, it can be used in a heavy-duty engine needing wet sleeve cavitation pitting protection. A charged coolant filter should be installed and maintained according to OEM preventative maintenance schedules if equipped. Test SCA charge levels according to OEM preventative maintenance schedules are necessary. Add SCA’s (Prestone Command ® HD200) when needed. NOTE: Any Class 1 through Class 8 cooling system; it is always recommended to at least flush the system with water when changing AFC with no signs of contamination in the cooling system. Any signs of contamination it is required to chemical flush the cooling system with a chemical flush solvent like Prestone ® 2in1 Flush Solvent. It is available in a LD & MD formulation and HD formulation. Antifreeze/Coolant Compatibility Reference Sheet September 18, 2017 (10Prestone Antifreeze Compatibility Reference Sheet for Training)