10 MIDWEST WHEEL COMPANIES EXHAUST CATALOG Rubber Reducing Elbow 90° Rubber Elbows For Air Inlet Systems Rubber Reducers Hump Hose P/N I.D. Length HV 34-4 4" 5.25" HV 34-5 5" 6" HV 34-55 5.5" 6" HV 34-6 6" 7" P/N I.D. 1 I.D. 2 Length HV 35-54 5" 4" 5.5" HV 35-554 5.5" 4" 6" HV 35-65 6" 5" 6" P/N D-1 D2 HV 38-555 5.5" 5" HV 38-65 6" 5" I.D. I.D. L For Air Inlet Systems Stainless Steel T-Bolt type allows flexible assembly of rubber elbows & aluminum tubing Spring Loaded T-Bolt Clamp Air Inlet Clamps P/N Dia. IDL30011 0250 051 2.5" IDL30011 0300 051 3" IDL30011 0350 051 3.5" IDL30011 0400 051 4.0" IDL30011 0500 051 5.0" IDL30011 0550 051 5.5" IDL30011 0600 051 6" IDL30011 0700 051 7.0" P/N Dia. IDL30030 0356 3 9/16" - 3 7/8" IDL30030 0406 4 1/16" - 4 3/8" IDL30030 0456 4 9/16" - 4 7/8" SILICONE CHARGE AIR COOLER HOSE (CAC) • 4-Ply aramid reinforced with high strength restrictor rings • For superior connection between engine mounted charge air systems components • Ideal for handling slight misalignments & isolating vibration between hose ends P/N Length ID (Side A) ID (Side B) AUT561.15300 6" 3.00" 3.00" AUT561.15350 6" 3.50" 3.50" AUT561.15350400 6" 4.00" 3.50" AUT561.1540060 6" 4.00" 4.00" AUT561.1540075 7.5" 4.00" 4.00" AUT561.1540080 8" 4.00" 4.00" AUT561.15450 8" 4.50" 4.50" P/N Length ID OD HV 44-250 6" 2.50" 2.71" HV 44-3540 6" 3.50/4.00" 3.71/4.21" HOT SIDE CAC HOSE P/N Description Length ID (Side A) ID (Side B) AUT561.62690 CAC Hose Cold Charge Air - Mack 6.375" 3.375" 3.375" AUT561.96337 CAC Hose Lower - Volvo 15.748" 3.150" 3.150" AUT561.75638 CAC Hose Cold Charge Air - Peterbilt 8.875" 2.500" 2.500" P/N Length ID (Side A) ID (Side B) AUT561.16300 6" 3.00" 3.00" AUT561.16350 6" 3.50" 3.50" AUT561.16400 6" 4.00" 4.00" AUT561.16460 with 1/8” Rings 6.5" 4.00" 4.00" COLD SIDE CAC HOSE CLAMPS FOR SILICONE HOSE Lined Hose Clamps • Stainless Steel Band, Saddle, & Housing • 5/16" Hex Screw • Recommended application up to 40 lbs-in torque • Seal silicone & other soft hoses without damage • Inner Liner Extends under the perforations to protect the hose & prevents extrusions through the worm gear perforations P/N Min. to Max. Size (Inches) IDL5344 051 2-5/16 - 3-1/4 IDL5348 051 2-9/16 - 3-1/2 IDL5352 051 2-13/16 - 3-3/4 IDL5360 051 3-5/16 - 4-1/4 90° HV 32-390 3" HV 32-590 5" SX 36175 6" 45° SX 36164 4"
RkJQdWJsaXNoZXIy MTEyNjY3NA==