MI17-08-MWW (Rev. 07-26) DC POWER PACKS • LED PTO indicator light for easy dash mounting • Larger console options for more mounting space for extra switches, lights, etc. • Push-to-connect air fittings allow easy installation for the air controller (standard in valve and air installation kit) CONTROL CONSOLES • 5 size options for polyethylene tanks • 6 size options for steel tanks • Provides hydraulic power for light-duty applications COMPACT HYDRAULIC SYSTEMS, FILTERS, AND CONSOLES HYDRAULIC OIL FILTERS • Effective and economical means of maintaining system cleanliness • Optional filter indicator gauge is available to show when to replace the filter • Available in 6 sizes with high-pressure options • Single and dual pressure, pneumatic or manually controlled valve • Incorporated mechanical stroke limiter • Fits heavy-duty vehicles and prime movers D242 SERIES TIPPER VALVE V130 SERIES DIRECTIONAL CONTROL VALVE V080 SERIES DIRECTIONAL CONTROL VALVE • Constructed with high-grade iron castings and nickel-plated spools for use in high- pressure applications • Load checks and inlet relief valve are standard • Internal, oil-core design allows for higher flow rates and low pressure drops in a compact package • Tight tolerances and precision machining keep internal, spool leakages low VALVES PH SERIES PK SERIES PL SERIES • All cast iron construction with 4 ports and roller bearing design • Max. pressure: 3,000 PSI • Flow ranges: 13.8–30.3 GPM @ 1,000 RPM • All cast iron construction with 4 ports and roller bearing design • Max. pressure: 3,000 PSI • Flow ranges: 4.2–17.1 GPM @ 1,000 RPM • All cast iron bushing pump designed for low- to medium-flow systems • Max. pressure: 3,500 PSI • Flow ranges: 2.7–10.7 GPM @ 1,000 RPM • Porting available on both the side and rear for tight-fitting chassis hookups • Max. pressure: 3,500 PSI • Flow ranges: 2.7–12.8 GPM @ 1,000 RPM HYDRAULIC PUMPS S SERIES (HOIST PUMP) E SERIES (DUMP PUMP) • Heavy-duty, cast iron pump • Max. pressure: 2,500 PSI • Flow ranges: 22.5–27.6 GPM @ 1,000 RPM • Specifically designed to use on small single- or tandem-axle dump trucks • Max. pressure: 3,000 PSI • Flow ranges: 6.4–17.16 GPM @ 1,000 RPM PH SERIES (CLUTCH PUMP) WET LINE KITS WET LINE KITS AND TELESCOPIC CYLINDERS • Wide selection of applicable PTOs, pumps, and control consoles • Hose and fittings assemblies available in numerous configurations • Variety of tank materials, sizes, and configurations are available • Mounting style allows for increased capacity in the dump body • Available in 3- and 4-stage versions • One of the strongest and most stable cylinders on the market TRUNNION MOUNT CYLINDERS PIN-PIN CYLINDERS • One of the lightest cylinders on the market for greater payloads, less oil consumption, and faster dumping • Self-bleeding design for easier installation • Single head nut with no further adjustments needed METAL • Aluminum and steel tanks are built for continuous-duty applications with easy installation POLYETHYLENE TANKS • Polyethylene tanks are lightweight, corrosion-resistant, easy to install, and suitable for short-duty applications where heat buildup isn’t a concern
RkJQdWJsaXNoZXIy